Meyer Burger
DW 288 S 4 Diamond
What is it?
What do the numbers mean?
Power & electrical2
Vacuum & pumping1
- Cutting fluid manifold without regulation valves, 1 mechanical flow meter (total cutting fluid flow controlled by pump rotation) and flow bars[1]
Optics & imaging1
Configuration & options16
- Wire Management System WM2[1]
- Rocking unit 90° clamping system and adaptive feed[1]
- Saphir cutting fluid media module with long filter[1]
- Tank drain with hand valve[1]
- Sign set in French:[1]
- Options would be necessary, to be able to run the machine in the US:[1]
- Sign set in English[1]
- Parts:[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationCutting fluid manifold without regulation valves, 1 mechanical flow meter (total cutting fluid flow controlled by pump rotation) and flow bars[1]
- ConfigurationStandard Europe power management (400V, 230V Schuko plugs)[1]
- ConfigurationUL conversion and voltage conversion (480V, 110V plugs)[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the DW 288 S 4 Diamond are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DW 288 S 4 Diamond are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DW 288 S 4 Diamond are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DW 288 S 4 Diamond are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DW 288 S 4 Diamond are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DW 288 S 4 Diamond is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Jul 29, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
General referenceThe Blanchard 18 D Surface is a vertical-spindle rotary-table surface grinding machine used to produce flat, parallel surfaces on metal workpieces.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
