Manufacturer
Nitto
Looking for practical guidance on Nitto? The reference remains the primary source; requests are private, the network is growing, and a relevant match is not guaranteed.
27 entries
- WM 2 Wafer MounterNitto
The Nitto Denko WM 2 Wafer Mounter is a semiconductor wafer mounting tool.
- NEL DR 8500 II Wafer TaperNitto
The Nitto Denko NEL DR 8500 II is a wafer taper described as a PLC-based system.
- HR 8500 II De-TaperNitto
The Nitto Denko HR 8500 II De-Taper is a de-taper machine manufactured by Nitto Denko.
- UVM 05 08 UVNitto
The Nitto Denko UVM 05 08 UV System is a Nitto-made UV system identified by model UVM 05 08.
- HR 8500 II Mechanical Lift OffNitto
- HR 8500 IINitto
The Nitto HR 8500 II is a wafer taper (laminator/remover) from Nitto Denko.
- DR 8500 IIINitto
The Nitto Denko DR 8500 III is a wafer laminator.
- RAD 3020 F DetaperNitto
The Nitto Denko RAD 3020 F Detaper is a Detaper-type equipment item made by Nitto Denko.
- NEL HR 8500 II PeelerNitto
- DR 8500 III TaperNitto
The Nitto DR 8500 III Taper is a Nitto Denko tool identified with an 8 inch wafer size.
- HR 8500 II UV DetaperNitto
The Nitto Denko HR 8500 II UV Detaper is a UV-equipped detaping tool used in semiconductor manufacturing.
CategoryPackaging & Bonding - HR 9300 DetaperNitto
The Nitto Denko HR 9300 Detaper is a detaper manufactured by Nitto Denko.
- MA 3000 II Wafer MounterNitto
The Nitto Denko MA 3000 II is a wafer mounter and de-mounter for 300 mm wafers.
- Seiko NEL D 304Nitto
- UM 110 UVNitto
The Nitto Denko UM 110 UV is a UV processing system manufactured by Nitto Denko.
- Nel GR 8500 II Attaching DeviceNitto
- MA 3000 II Backside TaperNitto
The Nitto Denko MA 3000 II Backside Taper is a backside taper tool for semiconductor manufacturing.
- DR 3000 IV Backside TaperNitto
- H 304 NNitto
- MSA 840 Wafer MounterNitto
The Nitto MSA 840 is a semi-automatic wafer mounter for dicing processes that handles wafers from 4 to 8 inches, with automatic tape application, cutting, and waste removal.
- DR 8500 III Wafer LaminatorNitto
The Nitto Denko DR 8500 III is a wafer laminator.
- DR 8500 II Wafer TaperNitto
The Nitto Denko DR 8500 II is a PLC-based wafer taper.
CategoryDicing & Grinding - Kagaku NHK 170 AF ElectricNitto
The Nitto Kagaku NHK 170 AF Electric is a thermal/diffusion electric furnace.
CategoryThermal / Diffusion - NEL HR 8500 II Wafer TaperNitto
The Nitto Denko NEL HR 8500 II is a wafer taper described as a PLC-based system.
- HR 8500 DetaperNitto
- HR 8500 III TW UV DetaperNitto
The Nitto Denko HR 8500 III TW UV Detaper is a wafer detaper for 8-inch wafers.
CategoryWet Processing / Clean - DR 8500 II TaperNittoCategoryLab & Support Equipment
