Manufacturer
Edwards
Looking for practical guidance on Edwards? The reference remains the primary source; requests are private, the network is growing, and a relevant match is not guaranteed.
105 entries
- PD3Edwards
The Edwards PD3 plate degasser is a vacuum coating system for degassing photographic films and plates before use in electron microscopes.
CategoryVacuum coating system - EPM75Edwards
The Edwards EPM75 is a planar magnetron sputtering source for vacuum coating systems.
CategoryCoating component - IQDP 80 Dry VacuumEdwards
The Edwards IQDP 80 is a dry vacuum pump.
- IGX 600 LEdwards
The Edwards IGX 600L is a dry pump with a pumping speed of 365 CFM and an ultimate pressure of 5.25×10⁻⁴ Torr.
- XP-59Edwards
The XP-59 is associated in the provided source text with testing of the Bell Aircraft P-59 Airacomet jet fighter at Muroc. The XP-59 arrived on 21 September 1942, and ground tests began five days later.
- IXL 120Edwards
The Edwards iXL120 is a low energy, compact dry pump system designed for clean duty applications.
- P-59 AiracometEdwards
The P-59 Airacomet was a jet fighter aircraft developed by Bell Aircraft and evaluated by the United States Army Air Forces at Muroc Army Airfield.
- P-59Edwards
The P-59A was the first production model of the Bell P-59 Airacomet jet fighter, whose first flight occurred at Muroc (later Edwards Air Force Base) on 1 October 1942.
- Lockheed P-80 Shooting StarEdwards
The Lockheed P-80 Shooting Star was flight-tested at Edwards Air Force Base (then Muroc Army Airfield) in the fall of 1945, with test work on the aircraft being the primary mission of the base for the greater part of that period.
- Consolidated Vultee XP-81Edwards
The Consolidated Vultee XP-81 is a single-seat, long-range escort fighter that arrived at Edwards Air Force Base in early 1946 for flight testing.
- Republic XP-84 ThunderjetEdwards
The Republic XP-84 Thunderjet is a fighter aircraft that arrived at Edwards Air Force Base in early 1946 for flight testing.
- IH 100Edwards
The Edwards IH 100 is a pump model by Edwards, identified by asset number 83861.
- IXH 1820 HEdwards
- IGX 100 MEdwards
The Edwards iGX 100 M is a dry vacuum pump from the iGX series designed for semiconductor applications.
- IPX 100 AEdwards
The Edwards IPX 100 A is a pump.
- IGX 1000 NEdwards
The Edwards IGX 1000 N is a dry vacuum pump designed for semiconductor processes, offering a pumping speed of 800 m³/h and an ultimate pressure of 7.5×10⁻⁴ Torr.
- RV 4 Rotary VaneEdwards
The Edwards RV 4 is a rotary vane vacuum pump.
- VIPX 100Edwards
- 250 BlowerEdwards
The Edwards 250 Blower is a vacuum blower used in semiconductor processing and industrial applications.
- EMF 20 Oil Mist FilterEdwards
The Edwards EMF 20 Oil Mist Filter is an oil mist exhaust filter with KF25 ports and a durable plastic body.
- 306 Thermal EvaporationEdwards
The Edwards 306 Thermal Evaporation is a deposition system manufactured by Edwards.
CategoryDeposition - iH 1000 DryEdwards
- XDS 10 ScrollEdwards
The Edwards XDS 10 is a dry scroll vacuum pump designed for clean pumping applications, with a maximum displacement of 13.4 m³/h at 60 Hz and ultimate total pressure of 6×10⁻² mbar at 60 Hz.
- NRC 3117 ThermalEdwardsCategoryDeposition
- E 2 M 2Edwards
The Edwards E2M2 is a rotary vacuum pump used for vacuum generation, with a maximum displacement of 2.8 m³/h at 50 Hz and an ultimate vacuum of 2.5×10⁻⁴ mbar partial pressure without gas-ballast.
- iXL 250 Q Turbomolecular VacuumEdwards
The Edwards iXL 250 Q is a turbomolecular vacuum pump.
- QMB 500Edwards
- iXH 1220 HTX DryEdwards
The Edwards iXH 1220 HTX is a dry pump.
- VEPX 2 180 LEdwards
The Edwards VEPX 2 180 L is a pump manufactured by Edwards.
- IQDP 40Edwards
The Edwards iQDP40 is a four-stage, positive displacement rotary dry vacuum pump designed for clean environments with water-cooled motor and no lubrication in the pumping chamber.
- E 2 M 5 High VacuumEdwards
The Edwards E 2 M 5 is a high vacuum pump.
- E 306 AEdwards
The Edwards E 306 A is a coater. The Edwards E 306 A includes a CT-200 cryopump and an oil based Edwards roughing pump.
- IQDP 80Edwards
- IXH 1220 H VacuumEdwards
The Edwards IXH 1220 H is a vacuum pump model manufactured by Edwards.
- IGX 600 M VacuumEdwards
The Edwards iGX600M is a dry vacuum pump from Edwards' iGX series with a peak speed of 600 m3 h-1 and an ultimate pressure of 7.00 x 10^-4 mbar.
- EPX 180 NEEdwards
The Edwards EPX 180 NE is a dry vacuum pump designed for semiconductor applications such as ash/strip and implant end stations.
CategoryIon Implantation - XDS-5Edwards
- IH 1800Edwards
The Edwards IH 1800 is a dry vacuum pump system comprising an HCDP160 dry pump and HMB1800 mechanical booster, designed for harsh semiconductor processes like PECVD and LPCVD.
- IQDP 80 DryEdwards
The Edwards IQDP 80 Dry is a four-stage positive displacement dry vacuum pump for semiconductor applications.
- EB1Edwards
The Edwards EB1 is an ultra-compact magnetically focused electron beam source with an integral dual water feedthrough.
Categoryelectron beam source - EXT 255 H TurboEdwards
- FL 20 K Foreline TrapEdwards
The Edwards FL20K foreline trap prevents back-migration of rotary pump oil mist into clean vacuum systems.
- IGX 600 MEdwards
The Edwards IGX 600 M is a dry pumping system used in laboratory and semiconductor applications.
- H 301 C Turbomolecular High VacuumEdwards
The Edwards H 301 C is a turbomolecular high vacuum pump, as listed in equipment inventory records.
- ESR 100 WN Laboratory VacuumEdwards
The Edwards ESR 100 WN is a laboratory vacuum pump.
- IXH 4550 H DryEdwards
The Edwards IXH 4550 H is a dry pump.
CategoryLab & Support Equipment - IXL 1000 DryEdwards
The Edwards IXL 1000 Dry is a dry pump model from Edwards.
- E 1 M 40 VacuumEdwards
- Bell X-1Edwards
The Bell X-1 is an experimental aircraft flown by Chuck Yeager in the flight that broke the sound barrier at Edwards Air Force Base.
- E 2 M 40Edwards
The Edwards E 2 M 40 is a pump manufactured by Edwards.
- EPXTWIN 180 LEdwards
The Edwards EPXTWIN 180 L is a pump.
- EPX 180 LEEdwards
- IXA 3305 CPEdwards
- IXH 610EdwardsCategoryLab & Support Equipment
- E 2 M 40 VacuumEdwards
The Edwards E 2 M 40 is a vacuum pump.
- E 2 M 80 PEPE VacuumEdwards
The Edwards E 2 M 80 PEPE is a rotary vacuum pump.
- E 306EdwardsCategoryDeposition
- OMB 500 DryEdwards
The Edwards OMB 500 Dry is a dry pump used in semiconductor manufacturing equipment.
- VIQDP 80Edwards
The Edwards VIQDP 80 is a pump.
- VIH 1800 HTXEdwards
The Edwards VIH 1800 HTX is a pump produced by Edwards.
