Strasbaugh
6 C R 2 DC 1
The Strasbaugh 6 C R 2 DC 1 is a grinder/polisher. The Strasbaugh 6 C R 2 DC 1 has a 36-inch pan. The Strasbaugh 6 C R 2 DC 1 is rated for 50/60 Hz, 220 V, and single-phase power.[1][2]
What it is
How it works
General reference — not yet source-verifiedA grinder/polisher removes material from a workpiece surface by bringing the part into contact with an abrasive or polishing interface under controlled motion and pressure.
CMP equipment is used to shape, smooth, and finish surfaces by combining mechanical action with polishing behavior on the process surface.
Where it fits in the process flow
General reference — not yet source-verifiedA grinder/polisher sits in surface-preparation and planarization flow before later inspection, film build, bonding, or device-processing steps that depend on a controlled surface condition.
Applications
General reference — not yet source-verifiedGrinder/polisher equipment is used on rigid substrates that require controlled flattening, smoothing, or surface preparation.
What do the numbers mean?
Power & electrical7
Configuration & options3
- 36 inch pan[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 6 C R 2 DC 1 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 6 C R 2 DC 1 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 6 C R 2 DC 1 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 6 C R 2 DC 1 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 6 C R 2 DC 1 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 6 C R 2 DC 1 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]Strasbaugh 6 C R 2 DC 1 family | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 12, 2026.
Compare with similar tools
View all →
The Logitech 1 DP 41 is a polisher with 3-phase, 50/60 Hz, 480 V, 12 amp electrical requirements.
The Strasbaugh 100R16 is a 1-spindle grinder/polisher with a DC drive system and 2 motors. The Strasbaugh 100R16 has a 16-inch capacity.
The Lapmaster 12 Benchtop Lapping / Polishing Machine is a bench-mounted single-sided lapping and polishing machine with a 12-inch plate diameter.
