Perkin Elmer
FTIR
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The PerkinElmer Frontier FTIR is a Fourier transform infrared spectrometer with mid-IR (8300–350 cm⁻¹) and far-IR (700–30 cm⁻¹) capability at a best resolution of 0.4 cm⁻¹.[1]
What it is
How it works
General reference — not yet source-verifiedFTIR spectrometers use interferometric measurement and Fourier transform processing to convert raw interferogram data into an infrared spectrum.
An FTIR instrument typically uses a broadband infrared source, a Michelson interferometer, a sample compartment, and a detector.
Where it fits in the process flow
General reference — not yet source-verifiedFTIR spectroscopy is used in analytical and characterization workflows for material identification and composition analysis.
An FTIR spectrometer commonly sits in laboratory analysis rather than in wafer fabrication process steps.
Applications
FTIR is used for applications that include polymer identification, adhesives analysis, curing studies, sealant characterization, and FTIR microscopy and imaging.[5]
What do the numbers mean?
Gas & chemistry1
- Absolute Virtual Instrument (AVI) option (Spectrum Two)
- Uses gas phase spectra for accurate calibration and wavenumber standardization[2]
Optics & imaging7
Dimensions & facilities1
Configuration & options10
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| Frontier FTIR | — | — | Mid-IR and far-IR capability, best resolution 0.4 cm⁻¹ | chem.washington.edu[1] |
| Spectrum Two FTIR | — | — | Portable, low-maintenance, multiple detector options (LiTaO₃ or Peltier-stabilized DTGS), Dynascan interferometer, OpticsGuard, AVC, AVI | laboratory-equipment.com[2] |
| Spectrum 3 Tri-Range MIR/NIR/FIR Spectrometer | — | — | Tri-range (MIR/NIR/FIR) spectrometer, used in semiconductor wafer characterization | perkinelmer.com[3] |
| Spotlight Aurora FTIR Microscope | — | — | FTIR microscopy and imaging system | perkinelmer.com[3] |
| PerkinElmer Frontier FTIR | — | — | Fourier transform infrared spectrometer with mid-IR (8300–350 cm−1) and far-IR (700–30 cm−1) capability at a best resolution of 0.4 cm−1 | chem.washington.edu[1] |
| PerkinElmer Spectrum Two FTIR | — | — | Portable FTIR spectrometer with Dynascan interferometer, OpticsGuard technology, Atmospheric Vapor Compensation, optional Peltier stabilized detector, signal-to-noise ratio up to 14,500:1 | laboratory-equipment.com[2] |
| PerkinElmer Spectrum 3 FTIR | — | — | Tri-Range MIR/NIR/FIR spectrometer | perkinelmer.com[3] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Absolute Virtual Instrument (AVI) option (Spectrum Two)Uses gas phase spectra for accurate calibration and wavenumber standardization[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What spectral range does the PerkinElmer Frontier FTIR cover?
The PerkinElmer Frontier FTIR covers mid-infrared (8300–350 cm⁻¹) and far-infrared (700–30 cm⁻¹).[1]
What is the best spectral resolution of the PerkinElmer Frontier FTIR?
The best resolution of the PerkinElmer Frontier FTIR is 0.4 cm⁻¹.[1]
What signal-to-noise ratio does the PerkinElmer Spectrum Two FTIR achieve?
The Spectrum Two FTIR has a signal-to-noise ratio of 9,300:1 with the LiTaO₃ detector and 14,500:1 with the Peltier stabilized detector.[2]
What detector options are available for the Spectrum Two FTIR?
The Spectrum Two FTIR is available with a standard LiTaO₃ (lithium tantalate) MIR detector or a Peltier stabilized detector.[2]
What operating temperature range does the Spectrum Two FTIR support?
The Spectrum Two FTIR operates from 5°C to 45°C.[2]
What sampling accessories are available for the Spectrum Two FTIR?
Accessories include the Portability Pack, Universal ATR Sampling, HATR Sampling, and various portability options.[2]
Not publicly documented
The following facts about the FTIR are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the FTIR are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the FTIR are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the FTIR are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the FTIR is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the FTIR are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]chem.washington.edu — chem.washington.educhem.washington.edu
- [2]laboratory-equipment.com — laboratory-equipment.comlaboratory-equipment.com
- [3]perkinelmer.com — perkinelmer.comperkinelmer.com
- [4]Equipment inventory listing
- [5]Search Results | PerkinElmer — perkinelmer.comperkinelmer.com
Last updated Oct 2, 2026.
Compare with similar tools
View all →
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.