Panasonic

NPM TT 2 Chip Mounter

Research Quality: 50% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

NPM TT 2 Chip Mounter — Inventory photo — Fig. 01NPM TT 2 Chip MounterInventory photo^[1]

Performance

±40 μm / chip^[3]

Optics

NM-EJM1E^[2]

What it is

The NPM-TT2 is a twin tray assembly platform in Panasonic’s NPM product family.^[2]^[3]

How it works

The NPM-TT2 supports independent placement in dual-lane mode and also supports single-lane operation for larger boards.^[2]^[3]

The NPM-TT2 supports tray components, tape and reel inputs, intelligent feeders, and interchangeable feeder and tray locations.^[2]

Where it fits in the process flow

The NPM-TT2 is intended to improve total productivity of mounting lines and to support high-speed mounting of odd-form components.^[3]

The NPM-TT2 is intended for line configurations that use tray feeders and tape-and-reel supply together.^[3]^[2]

What do the numbers mean?

Power & electrical1

Electric Source: 3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA^[2]

Optics & imaging1

Model No.: NM-EJM1E^[2]

Performance1

Placement Accuracy (Cpk≥1): ±40 μm / chip^[3]

Control & software2

PCB Dimensions (mm) PC size Single-lane mode: L 50 x W 50 ~ L 510 x W 590^[3]
PCB Dimensions (mm) PC size Dual-lane mode: L 50 x W 50 ~ L 510 x W 300^[3]

Dimensions & facilities6

PCB Dimensions (mm) M size Single-lane mode: L 50 x W 50 ~ L 510 x W 510^[3]
PCB Dimensions (mm) M size Dual-lane mode: L 50 x W 50 ~ L 510 x W 260^[3]
Component dimensions: 0402 chip ~ L 120 x W 90 x T 30 or L 150 x W 25 x T 30^[3]
Maximum number of components supply (Tape Width: 4 mm, 8 mm calculation): 120^[3]
Dimensions (mm): W 1,300 x D 2,798 x H 1,444^[2]
Mass: 2,690 kg (Only for main body)^[2]

Configuration & options5

Model ID: NPM-TT2^[2]
Placement Head max Speed: 18,000 cph (0.20 s / chip)^[3]
PCB Exchange Time Single-lane mode: 4.0 s (With no component mounted on the reverse side of PCB)^[2]
PCB Exchange Time Dual-lane mode: 0 s* (*No 0s when cycle time is 4.0 s or less)^[2]
Pneumatic Source: Min. 0.5 MPa, 200 L/min (A.N.R.)^[2]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Electric Source3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA^[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the NPM-TT2 designed to do?

The NPM-TT2 is a production modular platform for mounting lines. The NPM-TT2 supports high-speed, high-efficiency mounting of odd-form components. The NPM-TT2 is also intended to improve total productivity of mounting lines.^[3]

Does the NPM-TT2 support dual-lane operation?

The NPM-TT2 supports dual-lane mode. The NPM-TT2 allows independent placement in dual-lane operation. The NPM-TT2 can also be used in single-lane mode for larger boards.^[2]^[3]

What component supply formats does the NPM-TT2 support?

The NPM-TT2 supports tray components and tape-and-reel inputs. The NPM-TT2 also supports intelligent feeders and stackable stick feeders.^[2]

Not publicly documented

The following facts about the NPM TT 2 Chip Mounter are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NPM TT 2 Chip Mounter are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NPM TT 2 Chip Mounter are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NPM TT 2 Chip Mounter are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NPM TT 2 Chip Mounter are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NPM TT 2 Chip Mounter is not on record.
Answerable by: an OEM datasheet or a fab qualification report