Newport
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Newport SMC100 Series is a single-axis motion controller/driver for DC servo motors (SMC100CC) and 2-phase stepper motors (SMC100PP). The SMC100 Series features a compact design and daisy-chain capability for up to 31 axes. The controller uses RS-232-C or USB communication and a floating point digital PID loop.[1][2]
The SMC100CC uses a digital PID control algorithm with velocity and friction feedforward, operating at a 2 kHz servo rate. The controller incorporates backlash and hysteresis compensation. For stepper motor control, the SMC100PP drives two-phase stepper motors with a 100 kHz PWM switching frequency. The DC servo drive provides 48 VDC at 1.5 A rms (3 A peak), while the stepper drive provides 48 VDC at 1.1 A rms per phase. Communication with a host computer uses RS-232-C or an optional USB adapter. Up to thirty-one SMC100 controllers can be daisy-chained on an RS-485 bus to control multi-axis systems. The command set includes over forty intuitive two-letter ASCII commands, and a graphical user interface is provided for configuration and jogging.[1]
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
The SMC100CC and SMC100PP are single-axis motion controller/drivers for DC or stepper motors.[2]
The SMC100CC and SMC100PP support communication to several controllers.[2]
The SMC100CC and SMC100PP can be used with non Newport ESP compatible positioners or with changed default values.[2]
The following facts about the SMC 100 Series Motion Controller Driver are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SMC 100 Series Motion Controller Driver are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the SMC 100 Series Motion Controller Driver are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the SMC 100 Series Motion Controller Driver are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the SMC 100 Series Motion Controller Driver is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the SMC 100 Series Motion Controller Driver are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Last updated Oct 6, 2026.
The ABM-407B-2-S-CE-S293 is a robot.