ERSA
Powerflow N 2 XL Wave Soldering
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
What do the numbers mean?
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Vitronics Soltec Delta Wave 6622 CC Wave Soldering— Same function class: Assembly / SMT, nullCompare in depthsource[2]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What maintenances does a wave-soldering machine require?General reference — not yet source-verified
Regular maintenance includes cleaning the solder pot and pump, skimming dross from the molten solder surface, checking the flux spray nozzles for clogging, and calibrating preheat temperatures and conveyor speed. The flux recovery and exhaust systems also need periodic servicing.
Can wave soldering handle lead-free solder alloys?General reference — not yet source-verified
Yes, wave-soldering machines are designed to process both lead-based and lead-free solder alloys. Lead-free operation typically requires higher preheat and solder pot temperatures, as well as adjustments to flux chemistry and nitrogen inerting to reduce oxidation.
How do I choose between a double-wave and a single-wave system?General reference — not yet source-verified
The choice depends on the component types on the board. A double-wave configuration is common for mixed-technology boards with small SMDs on the underside, as the first wave is turbulent (to reach shadowed areas) and the second wave is laminar for final smoothing. Single-wave systems are adequate for boards with only through-hole parts or large leads.
What causes bridging defects in wave soldering?General reference — not yet source-verified
Bridging (solder shorting adjacent pins) can be caused by incorrect conveyor speed, excessive soldering time or temperature, poor flux activity, inadequate preheat, or poorly designed pad geometry. Proper process optimization and board layout can minimize the defect.
Can a wave-soldering machine be used for selective soldering?General reference — not yet source-verified
Some wave-soldering machines can be configured for selective soldering by using pallets or nozzles that shield areas not requiring solder, or by employing a dedicated solder wave in targeted zones. However, dedicated selective-soldering machines are more common for precise localized soldering.
Not publicly documented
The following facts about the Powerflow N 2 XL Wave Soldering are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Powerflow N 2 XL Wave Soldering are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Powerflow N 2 XL Wave Soldering are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Powerflow N 2 XL Wave Soldering are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Powerflow N 2 XL Wave Soldering are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Powerflow N 2 XL Wave Soldering is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]inventory listing
Last updated Oct 10, 2026.
Compare with similar tools
View all →
The Vitronics Soltec Delta Wave 6622 CC is a wave soldering machine with a Smart Wave option.
The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
