Bruker
UMT-1 Universal Tribometer Mechanical
The Bruker UMT-1 Universal Tribometer Mechanical is a Test & Probe tool. The Bruker UMT-1 Universal Tribometer Mechanical Tester includes an indenter controller NH. The Bruker UMT-1 Universal Tribometer Mechanical Tester includes an objective set plus spare set.[1][2]
What it is
The Bruker UMT-1 Universal Tribometer Mechanical Tester is a model of tribometer that includes a set of spare parts and hardware, one full set of drawers filled with screws and mounting hardware, an Indenter Controller NH, two force sensors (DFM-0.5-45293 and DFH-5-45293), an objective set (4/0.10 160/0.17, 10/0.25 160/0.17, DIN20 0.40) with a spare set, a user manual, and a software CD.[2][1]
How it works
General reference — not yet source-verifiedTribometers of this class typically operate by bringing a stationary probe (such as a pin, ball, or indenter) into contact with a moving sample surface under a defined normal load. The tangential friction force generated during relative motion is measured, along with vertical displacement, to calculate coefficients of friction and wear rates.
Applications
General reference — not yet source-verifiedThe instrument is suited for wear and friction testing of hard and soft coatings, self-lubricating materials, polymers, ceramics, and metals. The included force sensors and indenter controller enable tests in standard tribological configurations such as pin-on-disk or ball-on-flat.
What do the numbers mean?
Optics & imaging2
Control & software4
Configuration & options13
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the UMT-1 Universal Tribometer Mechanical are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UMT-1 Universal Tribometer Mechanical are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the UMT-1 Universal Tribometer Mechanical are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the UMT-1 Universal Tribometer Mechanical are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the UMT-1 Universal Tribometer Mechanical are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the UMT-1 Universal Tribometer Mechanical is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]Inventory photo
Last updated Oct 11, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
