Branson
1510 Ultrasonic
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Branson 1510 Ultrasonic Cleaner is an ultrasonic cleaning tool. The Branson 1510 Ultrasonic Cleaner uses a 40kHz transducer system. The Branson 1510 Ultrasonic Cleaner has a tank capacity of 1.89 L (0.5 gal).[1][2]
What it is
General reference — not yet source-verifiedThe Branson 1510 Ultrasonic is an ultrasonic cleaner for wet processing and parts cleaning. The unit is a benchtop cleaner used for liquid-based cleaning of small components and fixtures.
Why won't it start?
Documented failure modes, common issues, and field considerations.
- Novelty or inexpensive jewelry should not be cleaned.
- Gemstones such as emerald, amethyst, pearl, opal, coral, turquoise, peridot, and lapis lazuli should not be cleaned.
- Alcohol, gasoline, flammable solutions, bleach, and mineral acids should not be used.
- Parts or containers should not be placed directly on the bottom of the cleaning tank.
- The solution level should not drop more than 3/8 inch below the operating level line.
What do the numbers mean?
Power & electrical2
Performance1
Control & software1
Configuration & options8
- Tank sizes in line
- 1/2 gallons, 3/4 gallons, 1-1/2 gallons, 2-1/2 gallons, and 5-1/2 gallons[2]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| 1510 | — | 2007 | — | Equipment inventory listing[3] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What cleaning time range is given for the Branson 1510?
The Branson 1510 timer can be set from 0 to 60 minutes.[4]
Not publicly documented
The following facts about the 1510 Ultrasonic are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 1510 Ultrasonic are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the 1510 Ultrasonic are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the 1510 Ultrasonic is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 1510 Ultrasonic are on record.
Answerable by: an OEM parts catalog or a service engineer
No publicly hosted manuals, SOPs, or datasheets for the 1510 Ultrasonic are on record.
Answerable by: university cleanroom staff or an OEM application specialist
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]nist.gov — nist.govnist.gov
- [2]manualslib.com — manualslib.commanualslib.com
- [3]Inventory photo
- [4]BRANSON 1510 OPERATOR'S MANUAL Pdf Download | ManualsLib — manualslib.commanualslib.com
Last updated Oct 4, 2026.
Compare with similar tools
View all →The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.
The Semitool 11600 SRD is a spin rinse dryer manufactured by Semitool.