Agilent
35670 A Dynamic Signal Analyzer
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
Where it fits in the process flow
Applications
The 35670A is applied in troubleshooting mechanical vibration and noise problems, characterizing control systems, and performing general spectrum and network analysis. Optional features enable real-time octave analysis, computed order tracking for rotating machinery, and swept-sine measurements.[2][3]
What do the numbers mean?
No specifications recorded yet
Be the first to add cited specifications for this tool.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the frequency range of the Agilent 35670A?
The Agilent 35670A covers a frequency range from 122 μHz to 102.4 kHz in single-channel mode, with lower ranges for multiple channels.[2][3]
What measurement modes are available?
Standard modes include FFT analysis, histogram/time correlation analysis, and time capture. Optional modes include real-time octave analysis, computed order tracking, and swept-sine measurements.[2][3]
Not publicly documented
The following facts about the 35670 A Dynamic Signal Analyzer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No specifications for the 35670 A Dynamic Signal Analyzer are on record.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 35670 A Dynamic Signal Analyzer are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 35670 A Dynamic Signal Analyzer are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 35670 A Dynamic Signal Analyzer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 35670 A Dynamic Signal Analyzer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]https://www.keysight.com/us/en/assets/7018-06736/technical-overviews-archived/5966-3063.pdf — keysight.comkeysight.com
- [3]https://testequipment.center/Product_Documents/Agilent-35670A-Specifications-DB7D3.pdf — testequipment.centertestequipment.center
Last updated Sep 27, 2026.
Compare with similar tools
View all →The ABM-407B-2-S-CE-S293 is a robot.