Accretech
UF 200 A Automatic Wafer
What it is
How it works
General reference — not yet source-verifiedAn automatic wafer prober positions a wafer on a chuck that can be moved in the X, Y, and theta directions under computer control. The system aligns the wafer to a probe card, then steps the wafer so that each die is sequentially brought into contact with the probe needles. Electrical test signals from a connected tester are routed through the probe card to the device under test.
What do the numbers mean?
Wafer handling7
Configuration & options19
- 3 G 05 EH[9]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| UF 200 A | — | 2006–2008 | Sources state records with different chuck materials, OS versions, and vintages across 2006, 2007, and 2008. | Equipment inventory listing[10] |
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the UF 200 A Automatic Wafer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UF 200 A Automatic Wafer are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the UF 200 A Automatic Wafer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the UF 200 A Automatic Wafer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the UF 200 A Automatic Wafer is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the UF 200 A Automatic Wafer are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (11)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]Inventory photo
- [4]Inventory photo
- [5]Inventory photo
- [6]Inventory photo
- [7]Inventory photo
- [8]Inventory photo
- [9]inventory listing
- [10]Equipment inventory listing
- [11]Equipment inventory listing
Last updated Oct 11, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
