Comparison ledger
Tektronix 314, Tektronix 454, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 314Tektronix | 454Tektronix |
|---|---|---|
| OEM | Tektronix | Tektronix |
| Category | oscilloscope | oscilloscope |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | 1967 |
| Production run | 1975–1991 | 1967–1974 |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Tektronix 314 | Tektronix 454 |
| Cited variants | — |
|
| Specifications | ||
| series | 300 series[2] | 400 series[2] |
| brand context | Sony-Tektronix[2] | — |
| form factor | lightweight and totally portable[2] | — |
| Bandwidth | DC to 10 MHz (AC coupling LF cutoff <10 Hz)[3] | — |
| Deflection factor | 1 mV/div to 10 V/div, 1-2-5 sequence[3] | — |
| Input impedance | 1 MΩ // 47 pF[3] | — |
| Time base | 1 μs/div to 5 s/div, 1-2-5 sequence[3] | — |
| Storage type | Bistable storage[3] | — |
| Writing speed (normal) | >80 div/ms[3] | — |
| Writing speed (enhanced) | >400 div/ms (250 cm/ms)[3] | — |
| Stored viewing time | Up to 4 hours[3] | — |
| CRT display area | 8 × 10 divisions at 6 mm/div[3] | — |
| CRT phosphor | P44[3] | — |
| Acceleration voltage | 2 kV[3] | — |
| AC power requirements | 100, 115, 120, 200, 230, or 240 V AC, 48 to 440 Hz[4] | — |
| DC power requirements | +12 V or +24 V DC[4] | — |
| Type | portable dual-trace CRT storage oscilloscope[3] | Portable[2] |
| Storage | bistable storage; writing speed >80 div/ms, >400 div/ms in enhanced mode; stored viewing time to 4 hours[3] | — |
| CRT | 8×10 divisions @ 6 mm/div, P44 phosphor, 2 kV acceleration voltage[3] | — |
| Power sources | wall power, 12 V DC, or 24 V DC[3] | — |
| Deflection | 1 mV/div to 10 V/div, 1-2-5[3] | — |
| Power | wall power, 12 V DC, or 24 V DC[3] | — |
| Production period | 1975 to 1991[3] | — |
| bandwidth | — | 150 MHz[2] |
| portability | — | portable[2] |
Plan your fab
Building a oscilloscope process? Get a complete equipment list.
Open the fab equipment planner →