Comparison ledger
Kulicke & Soffa 4124 Ball, West Bond 10490, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 4124 BallKulicke & Soffa | 10490West Bond |
|---|---|---|
| OEM | Kulicke & Soffa | West Bond |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Kulicke & Soffa 4124 Ball | West Bond 10490 |
| Specifications | ||
| Manufacturer | Kulicke & Soffa[1] | West Bond[5] |
| Model | 4124 Ball[1] | 10490[5] |
| Equipment type | Ball Wire Bonder[1] | — |
| Bond wire material | Gold wire[2] | — |
| Bonding mode | Semi-auto, Manual[2] | — |
| Bonding area | 152 x 152 mm (6 x 6 inch)[2] | — |
| Throat depth | 143 mm (5.6 inch)[2] | — |
| Gross table motion | 140 mm (5.5 inch)[2] | — |
| Fine table motion | 14 mm (0.55 inch)[2] | — |
| Mouse ratio | 6:1[2] | — |
| Z-motion system | DC servo/LVDT control[2] | — |
| Z travel | 9.1 mm[2] | — |
| Ultrasonic system | High Q 60 kHz transducer; PLL ultrasonic generator[2] | — |
| Low ultrasonic power | 1.3 W[2] | — |
| High ultrasonic power | 2.5 W[2] | — |
| Bond time | 10-100 msec / 10-1000 msec[2] | — |
| Single Point TAB | Available[2] | — |
| Bond force | Force coil 10-160 g[2] | — |
| Wire diameter | 17.5 µ to 75 µ[2] | — |
| Spool size | 2"[2] | — |
| Maximum work-piece size | About 3 inches square[3] | — |
| Search position height | 75-125 um above the bond site level[4] | — |
| Wire Material | Gold[2] | — |
| Wire Diameter Range | 17.5 to 75 µm[2] | — |
| Spool Size | 2 inch[2] | — |
| Modes of Operation | Semi-auto, Manual Z[2] | — |
| Deep Access Option | 0.0650" length Capillary[2] | — |
| Description | — | Convertible bonder, wedge to ball[6] |
| Tool type | — | Convertible bonder[7] |
| Bonding modes | — | Wedge bonding and ball bonding[7] |
| Use | — | Wire bonding[7] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →