Comparison ledger
Heller 1707 EXL Reflow Soldering, Yamaha YV 100 XG Chip Placer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | YV 100 XG Chip PlacerYamaha | |
|---|---|---|
| OEM | Heller | Yamaha |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2004 Vintage year |
| Control system | — | — |
| Generation | — | — |
| Family | — | Yamaha YV 100 XG Chip Placer |
| Cited variants | — | |
| Specifications | ||
| Make | Heller[2] | Yamaha[4] |
| Model | 1707 EXL[2] | YV 100 XG[4] |
| Machine type | Reflow soldering machine / reflow soldering oven[2] | — |
| Vintage | 2005[2] | — |
| Power input | Standard 208/240 VAC 3-phase[3] | — |
| Breaker size | 100 amps @ 480 V[3] | — |
| Optional power inputs | 380/400/440/415/480 VAC[3] | — |
| Frequency | 50/60 Hz[3] | — |
| Overall length | 134 in (340 cm)[3] | — |
| Overall width | 54 in (137 cm)[3] | — |
| Overall height | 63 in (160 cm)[3] | — |
| Typical net weight | 3000 lbs (1360 kg)[3] | — |
| Operating system | Windows XP[3] | — |
| Top heating zones | 7[3] | — |
| Bottom heating zones | 7[3] | — |
| Cooling zones | 1[3] | — |
| Heater type | Instant response open coil[3] | — |
| Heater material | Nichrome[3] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[3] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[3] | — |
| Mounting speed | — | 16200 CPH (0.18 seconds/CHIP)[1] |
| Mounting accuracy | — | ±0.05mm/chip, ±0.05mm/QFP[1] |
| Mountable components | — | 0603-31mm Components, SOP, SOJ, QFP, Connectors, PLCC, CSP, BGA[1] |
| Board size (M type) | — | L460×W335 (MAX) – L50×W50 (MIN)[1] |
| Board size (L type) | — | L460×W440 (MAX) – L50×W50 (MIN)[1] |
| Dimensions (mm) | — | 1650 × 1408 × 1900[1] |
| Weight (kg) | — | 1600[1] |
| Cameras | — | 2 high-resolution multi-vision digital cameras[1] |
| Y-axis drive | — | Dual-drive with high-power servo amplifiers and high-rigidity screw rods[1] |
| Nozzle | — | Optional flight change nozzle (patented)[1] |
| Mounting accuracy (absolute) | — | ±0.05 mm/chip, ±0.05 mm/QFP[1] |
| Repeat accuracy | — | ±30 µm[1] |
| Total weight | — | 1600 kg[1] |
| Dimensions | — | 1650 × 1408 × 1900 mm[1] |
| Number of cameras | — | 2 high resolution multi-vision digital cameras[1] |
| Asset # | — | 144029[4] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →