Comparison ledger
Heller 1707 EXL Reflow Soldering, Yamaha YS 12 F, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | YS 12 FYamaha | |
|---|---|---|
| OEM | Heller | Yamaha |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Yamaha YS 12 F |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | — |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | — |
| Vintage | 2005[1] | — |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Substrate size (min) | — | L50 × W50 mm[3] |
| Substrate size (max) | — | L510 × W460 mm[3] |
| Mounting accuracy | — | ±0.05 mm / CHIP[3] |
| Placement rate | — | 20,000 CPH (company conditions)[3] |
| Component size range | — | 0402 to 45 × 100 mm (including ball electrode components); components up to 15 mm height[3] |
| Component supply method | — | Tape and tray supply[3] |
| Tape component capacity | — | 106 types (8 mm tape conversion)[3] |
| Tray component capacity | — | 15 types (JEDEC tray conversion)[3] |
| Power supply | — | Three-phase AC 200/208/220/240/380/400/416 V ±10%[3] |
| Air supply requirement | — | Above 0.45 MPa, clean and dry[3] |
| Dimensions (with ATS15) | — | L1,254 × W1,755 × H1,475 mm[3] |
| Weight (with ATS15) | — | Approx. 1,370 kg[3] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →